Your Cart is Empty
EQUIPMENT
CRAFTSMANSHIP MEETS CARBON FIBER
Our 15,000 sq ft facility is comprised of three separate buildings specifically laid out to optimize the flow of our customer’s projects. The dedicated Layup Department building is 7,000 sq ft of clean, temperature controlled, workspace complete with all the equipment required to perform vacuum resin infusion, oven cure pre-preg, and pressed layups. Our 6,000 sq ft industrial Tooling, Trim, and Assembly Department building is stock full of all the equipment and tools needed to bring any project to life, including CNC’s, ventilated workspaces, power tools, and hand tools. Parts are completed in our 2,000 sq ft Paint Department building complete with a dedicated automotive paint booth for high-end clear coat finishes. Our facility has an additional 2,500 sq ft of gated and covered exterior storage for tooling that needs to be stored long term. Refer to the list of equipment below for a sense of our capabilities.
Thermwood C67 5-Axis CNC Router
This large format router has a machining envelope of 10ft x 5ft and 3ft of Z height. Complete with a duel ended 5-axis spindle, this CNC is capable of machining a complete car buck in one shot while holding tolerances of +/- 0.015”.
Fadal 3016 – Retrofit Vertical Mill
Our Fadal CNC is a 3-axis, built-to-last Vertical Milling Center that has been retrofit with the latest electronics and controls to hold high tolerances for precision metal tooling and trim operations.
Laguna Smartshop II Router
Used for tooling and trim operations, this 4ft x 8ft router table has been our workhorse for the past 4 years. With its vacuum table and precision locating pin system, we can CNC trim parts to +/-0.015” accuracy and repeatability with our custom-built vacuum trim fixtures.
Ventilated Paint Booths
We have three full size automotive paint booths throughout our facility to ensure healthy and clean workspaces for our employees.
Large Scale Pre-Preg/Post Cure Oven
Our custom-built curing oven has an internal capacity of 14ft x 6ft x 6ft capable of curing pre-pregs up to 350F with ramped temperature controllers. It is also used to post cure all infused parts up to 200F.
Eastman M9000 CNC Ply Cutting Table
This 16 ft long CNC kitting table is used to kit all consumable materials for our projects. This machine reduces scrap and kitting time by 25% for a cost savings for our customers.
30 Ton Heated Press – 20” x 20”
For high volume small components, we use this press to make thousands of composite parts per year in steel and aluminum molds with high heat and pressure. Capable of reaching 850F, this press can process thermosets and thermoplastics.
3D Printers
You can always find our 3D printers humming away making templates, drill guides, assembly components, or complex fixtures. Capable of FDM and MSLA prints in a large variety of materials.
C02 Laser Cutters
Our 150W C02 lasers are perfect for pattern and template making in addition to laser engravings for part markings or customization.